How do I replace a battery in a Kontakt.io beacon?
Replacing the battery in your Kontakt.io Beacon
Simon Toulson
08 October 2014 05:38
Kontakt.io Beacon battery
* Kontakt.io Beacons use a single CR2477T coin battery. With the default settings, your battery should last up to two years!
* Kontakt.io Beacons already come with a battery installed, and are fully operational straight out of the box.
* Battery problems? Check out our comprehensive warranty.
* You can check your battery level directly from your iPhone with our free IOS App.
Step 1 - Opening the beacon case. Flip off the back of your Kontakt.io Beacon
You can replace the battery yourself in a just a couple of minutes and you’ll need no special tools. You can use a screwdriver or pocket knife to do this. There’s no need to use force, it should click off easily.
Step 2 - Removing the board and battery
Drop the battery and board assembly into the palm of your hand. There is a sturdy clip to keep your battery firmly in place - just slide out the old battery.
Step 3 - Replace the battery
You’ll notice that the +ve face of the coin battery is flat (and normally marked with a +), and the-ve face is slightly rounded. Make sure that the -ve face, the rounded one, is closest to the circuit board. Slide your new battery into position - with the U clip more or less in the center of the battery.
Step 4 - Closing the beacon case
Place the board assembly and battery into the molded container on the base of your beacon.
Step 4.1 Two small tabs
You’ll notice that the base has two small tabs on one face and a single tab on the opposing face. These having matching small slots in the Beacon cover.
Step 4.2 Just position and click!
Place the beacon base on a hard surface, such as a desk or table. Line up the tabs on the base, with the small slots in the beacon cover, and press the cover firmly into place. You’ll hear a small click when it has seated properly.
That's it, you're done. Your Kontakt.io Beacon is good for another two year's uninterrupted operation!!